inventory setup

spec/controllers/inventory_definitions_controller_spec.rb

@@ -0,0 +1,141 @@
+require 'rails_helper'
+
+# This spec was generated by rspec-rails when you ran the scaffold generator.
+# It demonstrates how one might use RSpec to specify the controller code that
+# was generated by Rails when you ran the scaffold generator.
+#
+# It assumes that the implementation code is generated by the rails scaffold
+# generator.  If you are using any extension libraries to generate different
+# controller code, this generated spec may or may not pass.
+#
+# It only uses APIs available in rails and/or rspec-rails.  There are a number
+# of tools you can use to make these specs even more expressive, but we're
+# sticking to rails and rspec-rails APIs to keep things simple and stable.
+#
+# Compared to earlier versions of this generator, there is very limited use of
+# stubs and message expectations in this spec.  Stubs are only used when there
+# is no simpler way to get a handle on the object needed for the example.
+# Message expectations are only used when there is no simpler way to specify
+# that an instance is receiving a specific message.
+#
+# Also compared to earlier versions of this generator, there are no longer any
+# expectations of assigns and templates rendered. These features have been
+# removed from Rails core in Rails 5, but can be added back in via the
+# `rails-controller-testing` gem.
+
+RSpec.describe InventoryDefinitionsController, type: :controller do
+
+  # This should return the minimal set of attributes required to create a valid
+  # InventoryDefinition. As you add validations to InventoryDefinition, be sure to
+  # adjust the attributes here as well.
+  let(:valid_attributes) {
+    skip("Add a hash of attributes valid for your model")
+  }
+
+  let(:invalid_attributes) {
+    skip("Add a hash of attributes invalid for your model")
+  }
+
+  # This should return the minimal set of values that should be in the session
+  # in order to pass any filters (e.g. authentication) defined in
+  # InventoryDefinitionsController. Be sure to keep this updated too.
+  let(:valid_session) { {} }
+
+  describe "GET #index" do
+    it "returns a success response" do
+      inventory_definition = InventoryDefinition.create! valid_attributes
+      get :index, params: {}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #show" do
+    it "returns a success response" do
+      inventory_definition = InventoryDefinition.create! valid_attributes
+      get :show, params: {id: inventory_definition.to_param}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #new" do
+    it "returns a success response" do
+      get :new, params: {}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #edit" do
+    it "returns a success response" do
+      inventory_definition = InventoryDefinition.create! valid_attributes
+      get :edit, params: {id: inventory_definition.to_param}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "POST #create" do
+    context "with valid params" do
+      it "creates a new InventoryDefinition" do
+        expect {
+          post :create, params: {inventory_definition: valid_attributes}, session: valid_session
+        }.to change(InventoryDefinition, :count).by(1)
+      end
+
+      it "redirects to the created inventory_definition" do
+        post :create, params: {inventory_definition: valid_attributes}, session: valid_session
+        expect(response).to redirect_to(InventoryDefinition.last)
+      end
+    end
+
+    context "with invalid params" do
+      it "returns a success response (i.e. to display the 'new' template)" do
+        post :create, params: {inventory_definition: invalid_attributes}, session: valid_session
+        expect(response).to be_success
+      end
+    end
+  end
+
+  describe "PUT #update" do
+    context "with valid params" do
+      let(:new_attributes) {
+        skip("Add a hash of attributes valid for your model")
+      }
+
+      it "updates the requested inventory_definition" do
+        inventory_definition = InventoryDefinition.create! valid_attributes
+        put :update, params: {id: inventory_definition.to_param, inventory_definition: new_attributes}, session: valid_session
+        inventory_definition.reload
+        skip("Add assertions for updated state")
+      end
+
+      it "redirects to the inventory_definition" do
+        inventory_definition = InventoryDefinition.create! valid_attributes
+        put :update, params: {id: inventory_definition.to_param, inventory_definition: valid_attributes}, session: valid_session
+        expect(response).to redirect_to(inventory_definition)
+      end
+    end
+
+    context "with invalid params" do
+      it "returns a success response (i.e. to display the 'edit' template)" do
+        inventory_definition = InventoryDefinition.create! valid_attributes
+        put :update, params: {id: inventory_definition.to_param, inventory_definition: invalid_attributes}, session: valid_session
+        expect(response).to be_success
+      end
+    end
+  end
+
+  describe "DELETE #destroy" do
+    it "destroys the requested inventory_definition" do
+      inventory_definition = InventoryDefinition.create! valid_attributes
+      expect {
+        delete :destroy, params: {id: inventory_definition.to_param}, session: valid_session
+      }.to change(InventoryDefinition, :count).by(-1)
+    end
+
+    it "redirects to the inventory_definitions list" do
+      inventory_definition = InventoryDefinition.create! valid_attributes
+      delete :destroy, params: {id: inventory_definition.to_param}, session: valid_session
+      expect(response).to redirect_to(inventory_definitions_url)
+    end
+  end
+
+end

spec/controllers/stock_check_items_controller_spec.rb

@@ -0,0 +1,141 @@
+require 'rails_helper'
+
+# This spec was generated by rspec-rails when you ran the scaffold generator.
+# It demonstrates how one might use RSpec to specify the controller code that
+# was generated by Rails when you ran the scaffold generator.
+#
+# It assumes that the implementation code is generated by the rails scaffold
+# generator.  If you are using any extension libraries to generate different
+# controller code, this generated spec may or may not pass.
+#
+# It only uses APIs available in rails and/or rspec-rails.  There are a number
+# of tools you can use to make these specs even more expressive, but we're
+# sticking to rails and rspec-rails APIs to keep things simple and stable.
+#
+# Compared to earlier versions of this generator, there is very limited use of
+# stubs and message expectations in this spec.  Stubs are only used when there
+# is no simpler way to get a handle on the object needed for the example.
+# Message expectations are only used when there is no simpler way to specify
+# that an instance is receiving a specific message.
+#
+# Also compared to earlier versions of this generator, there are no longer any
+# expectations of assigns and templates rendered. These features have been
+# removed from Rails core in Rails 5, but can be added back in via the
+# `rails-controller-testing` gem.
+
+RSpec.describe StockCheckItemsController, type: :controller do
+
+  # This should return the minimal set of attributes required to create a valid
+  # StockCheckItem. As you add validations to StockCheckItem, be sure to
+  # adjust the attributes here as well.
+  let(:valid_attributes) {
+    skip("Add a hash of attributes valid for your model")
+  }
+
+  let(:invalid_attributes) {
+    skip("Add a hash of attributes invalid for your model")
+  }
+
+  # This should return the minimal set of values that should be in the session
+  # in order to pass any filters (e.g. authentication) defined in
+  # StockCheckItemsController. Be sure to keep this updated too.
+  let(:valid_session) { {} }
+
+  describe "GET #index" do
+    it "returns a success response" do
+      stock_check_item = StockCheckItem.create! valid_attributes
+      get :index, params: {}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #show" do
+    it "returns a success response" do
+      stock_check_item = StockCheckItem.create! valid_attributes
+      get :show, params: {id: stock_check_item.to_param}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #new" do
+    it "returns a success response" do
+      get :new, params: {}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #edit" do
+    it "returns a success response" do
+      stock_check_item = StockCheckItem.create! valid_attributes
+      get :edit, params: {id: stock_check_item.to_param}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "POST #create" do
+    context "with valid params" do
+      it "creates a new StockCheckItem" do
+        expect {
+          post :create, params: {stock_check_item: valid_attributes}, session: valid_session
+        }.to change(StockCheckItem, :count).by(1)
+      end
+
+      it "redirects to the created stock_check_item" do
+        post :create, params: {stock_check_item: valid_attributes}, session: valid_session
+        expect(response).to redirect_to(StockCheckItem.last)
+      end
+    end
+
+    context "with invalid params" do
+      it "returns a success response (i.e. to display the 'new' template)" do
+        post :create, params: {stock_check_item: invalid_attributes}, session: valid_session
+        expect(response).to be_success
+      end
+    end
+  end
+
+  describe "PUT #update" do
+    context "with valid params" do
+      let(:new_attributes) {
+        skip("Add a hash of attributes valid for your model")
+      }
+
+      it "updates the requested stock_check_item" do
+        stock_check_item = StockCheckItem.create! valid_attributes
+        put :update, params: {id: stock_check_item.to_param, stock_check_item: new_attributes}, session: valid_session
+        stock_check_item.reload
+        skip("Add assertions for updated state")
+      end
+
+      it "redirects to the stock_check_item" do
+        stock_check_item = StockCheckItem.create! valid_attributes
+        put :update, params: {id: stock_check_item.to_param, stock_check_item: valid_attributes}, session: valid_session
+        expect(response).to redirect_to(stock_check_item)
+      end
+    end
+
+    context "with invalid params" do
+      it "returns a success response (i.e. to display the 'edit' template)" do
+        stock_check_item = StockCheckItem.create! valid_attributes
+        put :update, params: {id: stock_check_item.to_param, stock_check_item: invalid_attributes}, session: valid_session
+        expect(response).to be_success
+      end
+    end
+  end
+
+  describe "DELETE #destroy" do
+    it "destroys the requested stock_check_item" do
+      stock_check_item = StockCheckItem.create! valid_attributes
+      expect {
+        delete :destroy, params: {id: stock_check_item.to_param}, session: valid_session
+      }.to change(StockCheckItem, :count).by(-1)
+    end
+
+    it "redirects to the stock_check_items list" do
+      stock_check_item = StockCheckItem.create! valid_attributes
+      delete :destroy, params: {id: stock_check_item.to_param}, session: valid_session
+      expect(response).to redirect_to(stock_check_items_url)
+    end
+  end
+
+end

spec/controllers/stock_checks_controller_spec.rb

@@ -0,0 +1,141 @@
+require 'rails_helper'
+
+# This spec was generated by rspec-rails when you ran the scaffold generator.
+# It demonstrates how one might use RSpec to specify the controller code that
+# was generated by Rails when you ran the scaffold generator.
+#
+# It assumes that the implementation code is generated by the rails scaffold
+# generator.  If you are using any extension libraries to generate different
+# controller code, this generated spec may or may not pass.
+#
+# It only uses APIs available in rails and/or rspec-rails.  There are a number
+# of tools you can use to make these specs even more expressive, but we're
+# sticking to rails and rspec-rails APIs to keep things simple and stable.
+#
+# Compared to earlier versions of this generator, there is very limited use of
+# stubs and message expectations in this spec.  Stubs are only used when there
+# is no simpler way to get a handle on the object needed for the example.
+# Message expectations are only used when there is no simpler way to specify
+# that an instance is receiving a specific message.
+#
+# Also compared to earlier versions of this generator, there are no longer any
+# expectations of assigns and templates rendered. These features have been
+# removed from Rails core in Rails 5, but can be added back in via the
+# `rails-controller-testing` gem.
+
+RSpec.describe StockChecksController, type: :controller do
+
+  # This should return the minimal set of attributes required to create a valid
+  # StockCheck. As you add validations to StockCheck, be sure to
+  # adjust the attributes here as well.
+  let(:valid_attributes) {
+    skip("Add a hash of attributes valid for your model")
+  }
+
+  let(:invalid_attributes) {
+    skip("Add a hash of attributes invalid for your model")
+  }
+
+  # This should return the minimal set of values that should be in the session
+  # in order to pass any filters (e.g. authentication) defined in
+  # StockChecksController. Be sure to keep this updated too.
+  let(:valid_session) { {} }
+
+  describe "GET #index" do
+    it "returns a success response" do
+      stock_check = StockCheck.create! valid_attributes
+      get :index, params: {}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #show" do
+    it "returns a success response" do
+      stock_check = StockCheck.create! valid_attributes
+      get :show, params: {id: stock_check.to_param}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #new" do
+    it "returns a success response" do
+      get :new, params: {}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #edit" do
+    it "returns a success response" do
+      stock_check = StockCheck.create! valid_attributes
+      get :edit, params: {id: stock_check.to_param}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "POST #create" do
+    context "with valid params" do
+      it "creates a new StockCheck" do
+        expect {
+          post :create, params: {stock_check: valid_attributes}, session: valid_session
+        }.to change(StockCheck, :count).by(1)
+      end
+
+      it "redirects to the created stock_check" do
+        post :create, params: {stock_check: valid_attributes}, session: valid_session
+        expect(response).to redirect_to(StockCheck.last)
+      end
+    end
+
+    context "with invalid params" do
+      it "returns a success response (i.e. to display the 'new' template)" do
+        post :create, params: {stock_check: invalid_attributes}, session: valid_session
+        expect(response).to be_success
+      end
+    end
+  end
+
+  describe "PUT #update" do
+    context "with valid params" do
+      let(:new_attributes) {
+        skip("Add a hash of attributes valid for your model")
+      }
+
+      it "updates the requested stock_check" do
+        stock_check = StockCheck.create! valid_attributes
+        put :update, params: {id: stock_check.to_param, stock_check: new_attributes}, session: valid_session
+        stock_check.reload
+        skip("Add assertions for updated state")
+      end
+
+      it "redirects to the stock_check" do
+        stock_check = StockCheck.create! valid_attributes
+        put :update, params: {id: stock_check.to_param, stock_check: valid_attributes}, session: valid_session
+        expect(response).to redirect_to(stock_check)
+      end
+    end
+
+    context "with invalid params" do
+      it "returns a success response (i.e. to display the 'edit' template)" do
+        stock_check = StockCheck.create! valid_attributes
+        put :update, params: {id: stock_check.to_param, stock_check: invalid_attributes}, session: valid_session
+        expect(response).to be_success
+      end
+    end
+  end
+
+  describe "DELETE #destroy" do
+    it "destroys the requested stock_check" do
+      stock_check = StockCheck.create! valid_attributes
+      expect {
+        delete :destroy, params: {id: stock_check.to_param}, session: valid_session
+      }.to change(StockCheck, :count).by(-1)
+    end
+
+    it "redirects to the stock_checks list" do
+      stock_check = StockCheck.create! valid_attributes
+      delete :destroy, params: {id: stock_check.to_param}, session: valid_session
+      expect(response).to redirect_to(stock_checks_url)
+    end
+  end
+
+end

spec/controllers/stock_journals_controller_spec.rb

@@ -0,0 +1,141 @@
+require 'rails_helper'
+
+# This spec was generated by rspec-rails when you ran the scaffold generator.
+# It demonstrates how one might use RSpec to specify the controller code that
+# was generated by Rails when you ran the scaffold generator.
+#
+# It assumes that the implementation code is generated by the rails scaffold
+# generator.  If you are using any extension libraries to generate different
+# controller code, this generated spec may or may not pass.
+#
+# It only uses APIs available in rails and/or rspec-rails.  There are a number
+# of tools you can use to make these specs even more expressive, but we're
+# sticking to rails and rspec-rails APIs to keep things simple and stable.
+#
+# Compared to earlier versions of this generator, there is very limited use of
+# stubs and message expectations in this spec.  Stubs are only used when there
+# is no simpler way to get a handle on the object needed for the example.
+# Message expectations are only used when there is no simpler way to specify
+# that an instance is receiving a specific message.
+#
+# Also compared to earlier versions of this generator, there are no longer any
+# expectations of assigns and templates rendered. These features have been
+# removed from Rails core in Rails 5, but can be added back in via the
+# `rails-controller-testing` gem.
+
+RSpec.describe StockJournalsController, type: :controller do
+
+  # This should return the minimal set of attributes required to create a valid
+  # StockJournal. As you add validations to StockJournal, be sure to
+  # adjust the attributes here as well.
+  let(:valid_attributes) {
+    skip("Add a hash of attributes valid for your model")
+  }
+
+  let(:invalid_attributes) {
+    skip("Add a hash of attributes invalid for your model")
+  }
+
+  # This should return the minimal set of values that should be in the session
+  # in order to pass any filters (e.g. authentication) defined in
+  # StockJournalsController. Be sure to keep this updated too.
+  let(:valid_session) { {} }
+
+  describe "GET #index" do
+    it "returns a success response" do
+      stock_journal = StockJournal.create! valid_attributes
+      get :index, params: {}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #show" do
+    it "returns a success response" do
+      stock_journal = StockJournal.create! valid_attributes
+      get :show, params: {id: stock_journal.to_param}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #new" do
+    it "returns a success response" do
+      get :new, params: {}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #edit" do
+    it "returns a success response" do
+      stock_journal = StockJournal.create! valid_attributes
+      get :edit, params: {id: stock_journal.to_param}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "POST #create" do
+    context "with valid params" do
+      it "creates a new StockJournal" do
+        expect {
+          post :create, params: {stock_journal: valid_attributes}, session: valid_session
+        }.to change(StockJournal, :count).by(1)
+      end
+
+      it "redirects to the created stock_journal" do
+        post :create, params: {stock_journal: valid_attributes}, session: valid_session
+        expect(response).to redirect_to(StockJournal.last)
+      end
+    end
+
+    context "with invalid params" do
+      it "returns a success response (i.e. to display the 'new' template)" do
+        post :create, params: {stock_journal: invalid_attributes}, session: valid_session
+        expect(response).to be_success
+      end
+    end
+  end
+
+  describe "PUT #update" do
+    context "with valid params" do
+      let(:new_attributes) {
+        skip("Add a hash of attributes valid for your model")
+      }
+
+      it "updates the requested stock_journal" do
+        stock_journal = StockJournal.create! valid_attributes
+        put :update, params: {id: stock_journal.to_param, stock_journal: new_attributes}, session: valid_session
+        stock_journal.reload
+        skip("Add assertions for updated state")
+      end
+
+      it "redirects to the stock_journal" do
+        stock_journal = StockJournal.create! valid_attributes
+        put :update, params: {id: stock_journal.to_param, stock_journal: valid_attributes}, session: valid_session
+        expect(response).to redirect_to(stock_journal)
+      end
+    end
+
+    context "with invalid params" do
+      it "returns a success response (i.e. to display the 'edit' template)" do
+        stock_journal = StockJournal.create! valid_attributes
+        put :update, params: {id: stock_journal.to_param, stock_journal: invalid_attributes}, session: valid_session
+        expect(response).to be_success
+      end
+    end
+  end
+
+  describe "DELETE #destroy" do
+    it "destroys the requested stock_journal" do
+      stock_journal = StockJournal.create! valid_attributes
+      expect {
+        delete :destroy, params: {id: stock_journal.to_param}, session: valid_session
+      }.to change(StockJournal, :count).by(-1)
+    end
+
+    it "redirects to the stock_journals list" do
+      stock_journal = StockJournal.create! valid_attributes
+      delete :destroy, params: {id: stock_journal.to_param}, session: valid_session
+      expect(response).to redirect_to(stock_journals_url)
+    end
+  end
+
+end