initial print setup

spec/controllers/print_settings_controller_spec.rb

@@ -0,0 +1,141 @@
+require 'rails_helper'
+
+# This spec was generated by rspec-rails when you ran the scaffold generator.
+# It demonstrates how one might use RSpec to specify the controller code that
+# was generated by Rails when you ran the scaffold generator.
+#
+# It assumes that the implementation code is generated by the rails scaffold
+# generator.  If you are using any extension libraries to generate different
+# controller code, this generated spec may or may not pass.
+#
+# It only uses APIs available in rails and/or rspec-rails.  There are a number
+# of tools you can use to make these specs even more expressive, but we're
+# sticking to rails and rspec-rails APIs to keep things simple and stable.
+#
+# Compared to earlier versions of this generator, there is very limited use of
+# stubs and message expectations in this spec.  Stubs are only used when there
+# is no simpler way to get a handle on the object needed for the example.
+# Message expectations are only used when there is no simpler way to specify
+# that an instance is receiving a specific message.
+#
+# Also compared to earlier versions of this generator, there are no longer any
+# expectations of assigns and templates rendered. These features have been
+# removed from Rails core in Rails 5, but can be added back in via the
+# `rails-controller-testing` gem.
+
+RSpec.describe PrintSettingsController, type: :controller do
+
+  # This should return the minimal set of attributes required to create a valid
+  # PrintSetting. As you add validations to PrintSetting, be sure to
+  # adjust the attributes here as well.
+  let(:valid_attributes) {
+    skip("Add a hash of attributes valid for your model")
+  }
+
+  let(:invalid_attributes) {
+    skip("Add a hash of attributes invalid for your model")
+  }
+
+  # This should return the minimal set of values that should be in the session
+  # in order to pass any filters (e.g. authentication) defined in
+  # PrintSettingsController. Be sure to keep this updated too.
+  let(:valid_session) { {} }
+
+  describe "GET #index" do
+    it "returns a success response" do
+      print_setting = PrintSetting.create! valid_attributes
+      get :index, params: {}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #show" do
+    it "returns a success response" do
+      print_setting = PrintSetting.create! valid_attributes
+      get :show, params: {id: print_setting.to_param}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #new" do
+    it "returns a success response" do
+      get :new, params: {}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "GET #edit" do
+    it "returns a success response" do
+      print_setting = PrintSetting.create! valid_attributes
+      get :edit, params: {id: print_setting.to_param}, session: valid_session
+      expect(response).to be_success
+    end
+  end
+
+  describe "POST #create" do
+    context "with valid params" do
+      it "creates a new PrintSetting" do
+        expect {
+          post :create, params: {print_setting: valid_attributes}, session: valid_session
+        }.to change(PrintSetting, :count).by(1)
+      end
+
+      it "redirects to the created print_setting" do
+        post :create, params: {print_setting: valid_attributes}, session: valid_session
+        expect(response).to redirect_to(PrintSetting.last)
+      end
+    end
+
+    context "with invalid params" do
+      it "returns a success response (i.e. to display the 'new' template)" do
+        post :create, params: {print_setting: invalid_attributes}, session: valid_session
+        expect(response).to be_success
+      end
+    end
+  end
+
+  describe "PUT #update" do
+    context "with valid params" do
+      let(:new_attributes) {
+        skip("Add a hash of attributes valid for your model")
+      }
+
+      it "updates the requested print_setting" do
+        print_setting = PrintSetting.create! valid_attributes
+        put :update, params: {id: print_setting.to_param, print_setting: new_attributes}, session: valid_session
+        print_setting.reload
+        skip("Add assertions for updated state")
+      end
+
+      it "redirects to the print_setting" do
+        print_setting = PrintSetting.create! valid_attributes
+        put :update, params: {id: print_setting.to_param, print_setting: valid_attributes}, session: valid_session
+        expect(response).to redirect_to(print_setting)
+      end
+    end
+
+    context "with invalid params" do
+      it "returns a success response (i.e. to display the 'edit' template)" do
+        print_setting = PrintSetting.create! valid_attributes
+        put :update, params: {id: print_setting.to_param, print_setting: invalid_attributes}, session: valid_session
+        expect(response).to be_success
+      end
+    end
+  end
+
+  describe "DELETE #destroy" do
+    it "destroys the requested print_setting" do
+      print_setting = PrintSetting.create! valid_attributes
+      expect {
+        delete :destroy, params: {id: print_setting.to_param}, session: valid_session
+      }.to change(PrintSetting, :count).by(-1)
+    end
+
+    it "redirects to the print_settings list" do
+      print_setting = PrintSetting.create! valid_attributes
+      delete :destroy, params: {id: print_setting.to_param}, session: valid_session
+      expect(response).to redirect_to(print_settings_url)
+    end
+  end
+
+end

spec/helpers/print_settings_helper_spec.rb

@@ -0,0 +1,15 @@
+require 'rails_helper'
+
+# Specs in this file have access to a helper object that includes
+# the PrintSettingsHelper. For example:
+#
+# describe PrintSettingsHelper do
+#   describe "string concat" do
+#     it "concats two strings with spaces" do
+#       expect(helper.concat_strings("this","that")).to eq("this that")
+#     end
+#   end
+# end
+RSpec.describe PrintSettingsHelper, type: :helper do
+  pending "add some examples to (or delete) #{__FILE__}"
+end

spec/models/print_setting_spec.rb

@@ -0,0 +1,5 @@
+require 'rails_helper'
+
+RSpec.describe PrintSetting, type: :model do
+  pending "add some examples to (or delete) #{__FILE__}"
+end

spec/requests/print_settings_spec.rb

@@ -0,0 +1,10 @@
+require 'rails_helper'
+
+RSpec.describe "PrintSettings", type: :request do
+  describe "GET /print_settings" do
+    it "works! (now write some real specs)" do
+      get print_settings_path
+      expect(response).to have_http_status(200)
+    end
+  end
+end

spec/routing/print_settings_routing_spec.rb

@@ -0,0 +1,39 @@
+require "rails_helper"
+
+RSpec.describe PrintSettingsController, type: :routing do
+  describe "routing" do
+
+    it "routes to #index" do
+      expect(:get => "/print_settings").to route_to("print_settings#index")
+    end
+
+    it "routes to #new" do
+      expect(:get => "/print_settings/new").to route_to("print_settings#new")
+    end
+
+    it "routes to #show" do
+      expect(:get => "/print_settings/1").to route_to("print_settings#show", :id => "1")
+    end
+
+    it "routes to #edit" do
+      expect(:get => "/print_settings/1/edit").to route_to("print_settings#edit", :id => "1")
+    end
+
+    it "routes to #create" do
+      expect(:post => "/print_settings").to route_to("print_settings#create")
+    end
+
+    it "routes to #update via PUT" do
+      expect(:put => "/print_settings/1").to route_to("print_settings#update", :id => "1")
+    end
+
+    it "routes to #update via PATCH" do
+      expect(:patch => "/print_settings/1").to route_to("print_settings#update", :id => "1")
+    end
+
+    it "routes to #destroy" do
+      expect(:delete => "/print_settings/1").to route_to("print_settings#destroy", :id => "1")
+    end
+
+  end
+end

spec/views/print_settings/edit.html.erb_spec.rb

@@ -0,0 +1,51 @@
+require 'rails_helper'
+
+RSpec.describe "print_settings/edit", type: :view do
+  before(:each) do
+    @print_setting = assign(:print_setting, PrintSetting.create!(
+      :name, => "MyString",
+      :unique_code, => "MyString",
+      :template, => "MyString",
+      :db_name, => "MyString",
+      :db_type, => "MyString",
+      :db_username, => "MyString",
+      :db_password, => "MyString",
+      :printer_name, => "MyString",
+      :api_settings, => "MyString",
+      :page_width => "",
+      :page_height => "",
+      :print_copies => 1
+    ))
+  end
+
+  it "renders the edit print_setting form" do
+    render
+
+    assert_select "form[action=?][method=?]", print_setting_path(@print_setting), "post" do
+
+      assert_select "input[name=?]", "print_setting[name,]"
+
+      assert_select "input[name=?]", "print_setting[unique_code,]"
+
+      assert_select "input[name=?]", "print_setting[template,]"
+
+      assert_select "input[name=?]", "print_setting[db_name,]"
+
+      assert_select "input[name=?]", "print_setting[db_type,]"
+
+      assert_select "input[name=?]", "print_setting[db_username,]"
+
+      assert_select "input[name=?]", "print_setting[db_password,]"
+
+      assert_select "input[name=?]", "print_setting[printer_name,]"
+
+      assert_select "input[name=?]", "print_setting[api_settings,]"
+
+      assert_select "input[name=?]", "print_setting[page_width]"
+
+      assert_select "input[name=?]", "print_setting[page_height]"
+
+      assert_select "input[name=?]", "print_setting[print_copies]"
+    end
+  end
+end

spec/views/print_settings/index.html.erb_spec.rb

@@ -0,0 +1,52 @@
+require 'rails_helper'
+
+RSpec.describe "print_settings/index", type: :view do
+  before(:each) do
+    assign(:print_settings, [
+      PrintSetting.create!(
+        :name, => "Name,",
+        :unique_code, => "Unique Code,",
+        :template, => "Template,",
+        :db_name, => "Db Name,",
+        :db_type, => "Db Type,",
+        :db_username, => "Db Username,",
+        :db_password, => "Db Password,",
+        :printer_name, => "Printer Name,",
+        :api_settings, => "Api Settings,",
+        :page_width => "",
+        :page_height => "",
+        :print_copies => 2
+      ),
+      PrintSetting.create!(
+        :name, => "Name,",
+        :unique_code, => "Unique Code,",
+        :template, => "Template,",
+        :db_name, => "Db Name,",
+        :db_type, => "Db Type,",
+        :db_username, => "Db Username,",
+        :db_password, => "Db Password,",
+        :printer_name, => "Printer Name,",
+        :api_settings, => "Api Settings,",
+        :page_width => "",
+        :page_height => "",
+        :print_copies => 2
+      )
+    ])
+  end
+
+  it "renders a list of print_settings" do
+    render
+    assert_select "tr>td", :text => "Name,".to_s, :count => 2
+    assert_select "tr>td", :text => "Unique Code,".to_s, :count => 2
+    assert_select "tr>td", :text => "Template,".to_s, :count => 2
+    assert_select "tr>td", :text => "Db Name,".to_s, :count => 2
+    assert_select "tr>td", :text => "Db Type,".to_s, :count => 2
+    assert_select "tr>td", :text => "Db Username,".to_s, :count => 2
+    assert_select "tr>td", :text => "Db Password,".to_s, :count => 2
+    assert_select "tr>td", :text => "Printer Name,".to_s, :count => 2
+    assert_select "tr>td", :text => "Api Settings,".to_s, :count => 2
+    assert_select "tr>td", :text => "".to_s, :count => 2
+    assert_select "tr>td", :text => "".to_s, :count => 2
+    assert_select "tr>td", :text => 2.to_s, :count => 2
+  end
+end

spec/views/print_settings/new.html.erb_spec.rb

@@ -0,0 +1,51 @@
+require 'rails_helper'
+
+RSpec.describe "print_settings/new", type: :view do
+  before(:each) do
+    assign(:print_setting, PrintSetting.new(
+      :name, => "MyString",
+      :unique_code, => "MyString",
+      :template, => "MyString",
+      :db_name, => "MyString",
+      :db_type, => "MyString",
+      :db_username, => "MyString",
+      :db_password, => "MyString",
+      :printer_name, => "MyString",
+      :api_settings, => "MyString",
+      :page_width => "",
+      :page_height => "",
+      :print_copies => 1
+    ))
+  end
+
+  it "renders new print_setting form" do
+    render
+
+    assert_select "form[action=?][method=?]", print_settings_path, "post" do
+
+      assert_select "input[name=?]", "print_setting[name,]"
+
+      assert_select "input[name=?]", "print_setting[unique_code,]"
+
+      assert_select "input[name=?]", "print_setting[template,]"
+
+      assert_select "input[name=?]", "print_setting[db_name,]"
+
+      assert_select "input[name=?]", "print_setting[db_type,]"
+
+      assert_select "input[name=?]", "print_setting[db_username,]"
+
+      assert_select "input[name=?]", "print_setting[db_password,]"
+
+      assert_select "input[name=?]", "print_setting[printer_name,]"
+
+      assert_select "input[name=?]", "print_setting[api_settings,]"
+
+      assert_select "input[name=?]", "print_setting[page_width]"
+
+      assert_select "input[name=?]", "print_setting[page_height]"
+
+      assert_select "input[name=?]", "print_setting[print_copies]"
+    end
+  end
+end

spec/views/print_settings/show.html.erb_spec.rb

@@ -0,0 +1,36 @@
+require 'rails_helper'
+
+RSpec.describe "print_settings/show", type: :view do
+  before(:each) do
+    @print_setting = assign(:print_setting, PrintSetting.create!(
+      :name, => "Name,",
+      :unique_code, => "Unique Code,",
+      :template, => "Template,",
+      :db_name, => "Db Name,",
+      :db_type, => "Db Type,",
+      :db_username, => "Db Username,",
+      :db_password, => "Db Password,",
+      :printer_name, => "Printer Name,",
+      :api_settings, => "Api Settings,",
+      :page_width => "",
+      :page_height => "",
+      :print_copies => 2
+    ))
+  end
+
+  it "renders attributes in <p>" do
+    render
+    expect(rendered).to match(/Name,/)
+    expect(rendered).to match(/Unique Code,/)
+    expect(rendered).to match(/Template,/)
+    expect(rendered).to match(/Db Name,/)
+    expect(rendered).to match(/Db Type,/)
+    expect(rendered).to match(/Db Username,/)
+    expect(rendered).to match(/Db Password,/)
+    expect(rendered).to match(/Printer Name,/)
+    expect(rendered).to match(/Api Settings,/)
+    expect(rendered).to match(//)
+    expect(rendered).to match(//)
+    expect(rendered).to match(/2/)
+  end
+end